A.I response time of droids

WHAT IS DARK MATTER

By Henryk Szubinski

the basic impulse of a droid processor in artificial intelligence as in

THE BLINK OF AN EYE

basis for the force to constrain the visual types of recorders and their process value comparatives of what the cause of the closed fase state of galactical centrations are based on as

the full vector and the process in lim x = 4 states of altered vectors in vector 3 S as reversed into the differencial of the remaining data on

differencial 3 S

= differencial on 4 S = value minimal sigmats = 4 R as the process comparatives on the type occular droid functions of what force level are close by command of a artificial intelligence operator

in 10 D hyperpsace of the universe

basically the z axis in 3 values

the y values in 1 D

as well as the restrictive values of  x 1 D

TYPE 1,2,3 BLACK HOLE POLYGON SOLIDS

STORAGE PROBLEMS OF SIMILAR VALUES

By Henryk Szubinski

THE PROCESS OF A FLATTENED Z AXIAL VALUE IN RESPONSE TO SIMILAR X ,Y COORDINATES IN CARTESIAN SPACETIME BY A VECTOR FLATNESS RESPONSE TO EQUATE THE VALUES OF THE Z INTO ANY OF 6 SIDES OF WHAT IS A SOILD OUTLINE ON A POLYGONAL SOLID

the proble being that 2 coordiante cartesian systems can only share 2 x values or 2 y values so that the resultance is 2 vectors betweeen the x and the y  = z vectors

WHERE THE X VALUES TRACES A RESISTANCE INTO THE Y VALUE AREA AND THE Z VALUE IS A CONNECTION OF THE VALUE 12 BETWEEN THEM

the process of using a horizon and the type eye lines as well as the vanishing point in type perspective of solids

———–eye line——-r———-horizon ——-r——(vanishing point)————–r————-

the radii of each interval will be defined as

S and also as R

which are

S = displacement

R = resistance

Radii, area, and volume

Another virtue of regularity is that the Platonic solids all possess three concentric spheres:

The radii of these spheres are called the circumradius, the midradius, and the inradius. These are the distances from the center of the polyhedron to the vertices, edge midpoints, and face centers respectively. The circumradius R and the inradius r of the solid {pq} with edge length a are given by

R = \left({a\over 2}\right)\tan\frac{\pi}{q}\tan\frac{\theta}{2}
r = \left({a\over 2}\right)\cot\frac{\pi}{p}\tan\frac{\theta}{2}

where θ is the dihedral angle. The midradius ρ is given by

\rho = \left({a\over 2}\right)\frac{\cos(\pi/p)}{\sin(\pi/h)}

where h is the quantity used above in the definition of the dihedral angle (h = 4, 6, 6, 10, or 10). Note that the ratio of the circumradius to the inradius is symmetric in p and q:

{R\over r} = \tan\frac{\pi}{p}\tan\frac{\pi}{q}.

The surface areaA, of a Platonic solid {pq} is easily computed as area of a regular p-gon times the number of faces F. This is:

A = \left({a\over 2}\right)^2 Fp\cot\frac{\pi}{p}.

The volume is computed as F times the volume of the pyramid whose base is a regular p-gon and whose height is the inradius r. That is,

V = {1\over 3}rA.

The following table lists the various radii of the Platonic solids together with their surface area and volume. The overall size is fixed by taking the edge length, a, to be equal to 2.

THE PROBLEMS OF DIVISION ARE BASICALLY 1/3 OF THE FULL HORIZON OR ITS 2 LEVELS = 3 VALUES IN A 6 VALUE SYSTEM VECTOR = SINGULARITY

A purely topological proof can be made using only combinatorial information about the solids. The key is Euler’s observation that V − EF = 2, and the fact that pF = 2EqV. Combining these equations one obtains the equation

\frac{2E}{q} - E + \frac{2E}{p} = 2.

Simple algebraic manipulation then gives

{1 \over q} + {1 \over p}= {1 \over 2} + {1 \over E}.

Since E is strictly positive we must have

\frac{1}{q} + \frac{1}{p} > \frac{1}{2}.

Using the fact that p and q must both be at least 3, one can easily see that there are only five possibilities for {pq}:

\{3, 3\},\quad \{4, 3\},\quad \{3, 4\},\quad \{5, 3\},\quad \{3,5\}.
BASIC PROBLEMS OF PLACEING ANY VALUE AMOUNTING TO THE SUM OF THE POINTS AS = TO 6 VALUES IN DIVISVES OF A FLAT STATE
X,Y,Z VALUE SYSTEM WHERE THE SOLID ON THE HORIZON WOULD BE DIVIDED BY 2 IN EACH OF ITS INTERVALS IS THE BASIC REASON OF WHY THERE IS A SIDE TO A POLYGONAL SOLID = 3 SIDES
a polgonal pyramid will when inverted and placed in the surface area polygon that it previously covered
= 6 S
but with one vector problem of the total divisives in their stages of a parameter = 6S / x
as the length of a polygon
6/y = 6S/x
so that the value of the sum value and the polygobnal values in their 3 sets are
6A/ z (6/y) = 6 S /x
so that the sets = 1 resistance problem of the types of vector oppositions by a shared vector spacetime
6A R/z= set 1 S
6y /R= set 2 S
6S /Rx= set 3 S
the process difference apparent in the multiple trigonometry of triangulations in 3 Dimensional space time has a multiple problem in the set value
6 S/ Rx = set 3 S
so that the problem can be balanced in the equation by 4 R = 3R
6S /R4 x = set 3 S 3R
where the equations of a value S 3 between them
S3 S3 R3 = 6S / R4 x
as the basic equation of all force in the universe by the types of surfaces that define the surface area of all objects in the universe
S6 = S6 (R12)
1 = R 12
as x,y,z values then, the process of force is
A /z
y/R
/Rx ; this is the problem of a unknown value being divided
so that the equation will be
(A/z) (y/R) (x/Rx) =R 12
(A /z) (y/R) = R12 (1/R)
A/z (y/R) =12
A/z = 12 (y/R)

BASICS OF EARTH

AND THE 2 VECTOR LIMITS OF THE POLAR INTERCIES PASSING THROUGH THEM

File:Icosahedron.svg

All other combinatorial information about these solids, such as total number of vertices (V), edges (E), and faces (F), can be determined from p and q. Since any edge joins two vertices and has two adjacent faces we must have:

pF = 2E = qV.\,

The other relationship between these values is given by Euler’s formula:

V - E + F = 2.\,

This nontrivial fact can be proved in a great variety of ways (in algebraic topology it follows from the fact that the Euler characteristic of the sphere is 2). Together these three relationships completely determine VE, and F:

V = \frac{4p}{4 - (p-2)(q-2)},\quad E = \frac{2pq}{4 - (p-2)(q-2)},\quad F = \frac{4q}{4 - (p-2)(q-2)}.

Note that swapping p and q interchanges F and V while leaving E unchanged (For a geometric interpretation of this fact see the section on dual polyhedra below).

[edit]Classification

力球 secret of spherical force OF i.t

SPHERICAL FORCE

secret

力球

By Henryk Szubinski

a spherical value is presented as:

example : kjew393rhfew0

Multi universally all meanings in their initials are based on the non recognition of the fight for meaning

so that : kjew393rhfew0

=a initial system, the decimal values as well as their  lim x = ? would have to be defined into

k.j.3.r.h.f.e.0

would be unreadable as the secret of FORCE

because the abuser is using a format of incoherent thought to designate the usage of the letter

the loss of force is based on the same meaning of non readability, whatever the traces to a language are , the secret of all argumentation is like the Andromeda galaxy a last fight for the non readability of all trace BITS and PIECES of the construct does

have =t

as well as its number =8

and the basics = x

as well as the usage of composites such as = (//)

basically the values are variables, numbers, factors,and language mechanics.

as such ,the values that are part of the process to dress and use personal priority ahead of the processess of place and meaning or as the function of a place by BITS and PIECES

or even that to have a number does not equate it into the circumstances of having aquired the spacetime without this number as the meaning of the process that describes the secret of all KI in the multi universal context:

“multi universally, the need for a number ,as the fight to understand  meaning  and its  win by usage, was never here ”

It was

the number or not, not the meaning or not , not the voice of its interior or not

As in any value , the loss has been fought and lost in its first 4 language bits:

the :

t (8 x) = (//)

as either the force of a sphere or its context full representation as the force defined by a specific meaning = F

in which case 1/2 the values in the universe as related to the process of the Force

as

t (8x) = F

the F is divided into 4 parts , to continue will define why the process is being power reduced

F = (//)

or

F = (1/2/3)4

the designated values in a sequnce seems to make sense but the values used as such in a lim x = t8x

F = t(1/2/8)3×4

the spacetime used by the definitions of the parallells defined as // is basically fased out of place so that a supersymmetricality

of

F =(//)

or

t8x = (//)

can use the divisives of each

(//)t8x / (//)F= to the unknown

(t/8/x) / (/F/) = the basics of the process as the vectorisations of

F=8

and t=x

so that

Ft =8x

of the basics of force as time results in 8 values of the x value

so that no force is ever seperated by time as a event which escapes the amount of times its value x is used as a unknown.

Basically even by using all the seperations of force tactics, the escape amounts to  greater than the unknown.

basically every force has this failure in its basic alterations of how to define a event

even as

death, life,science,or tricks

Ft = (//) the divisive of a odd number is decentered as the action

8x = (//)the same divisive to define why there is no centration as the reaction

(divisive/////////////odd number )

the parallells increase, but the odd value remains as such continually divided , continually uncentered

(similar divisive ////////////////no centration reaction)

THE BASICS OF THE MULTIPLE UNIVERSE AND THE POSITION OF THE OBSERVER IN IT

ユニバース

OR THE UNIVERSE , IN ALL NON LIMITED VALUES

BECAUSE THIS FORMAT IS OPEN TO BOTH DIFFERENCES AND WITHOUT COMMON REQUIREMENTS IT IS A BSIS FOR GREATER SIMILARITY OF THE POSITIVE VALUE OR EVEN GREATER AS SUCH

THIS IS THE BASICS OF A UNIVERSAL FAMILY OF FORCES AS 1  UNIVERSAL FORCE OR A MULTIPLE UNIVERSE FORCE:

4 th law 5th law of vechicularity

the 4 to 5 laws of vechicularity

By Henryk Szubinski

Circle of 12 gold stars on a blue background.

4 freedooms

5th framework the freedoom of knowledge moovement

Chordis6

the 7th framework Chordis

ALL DEFINITE PROCESSESS BEYOND A POINT OF NO RETURN ARE DEFINED AS THE STAGES ON WHICH PREVIOUS DATA IS USED AS THE STAGEINGS OF DEFINITE PROCESSESS IN TRANSFERRANCE FROM ONE TO THE NEXT . AS SUCH THE PROCESS DEFINITE STAGES ARE RELIANT ON THEIR PREVIOUS STAGES AS USED IN THE DEFINITION OF WHAT STAGE IS CURRENTLY BEING LOCKED DOWN AND AQUIRED BY THE ADVANCEMENT OF THE PROCESS TO ENGAGE DEFINITE ACTIVATIONS OF THE PROCESS TO USE THE PREVIOUS VALUES IN THE VECHICULARITY

WHEN COMPARED TO THE ANDROMEDA GALAXY AND THE MILKY WAY GALAXY THEESE STEPS ARE MOST TYPICALLY SHOWN AS THE STAGES FROM 1 AND TO 6 AS THE FORCE BETWEEN ALL MOTION DECISION PROCESSESS IN THE UNIVERSE AS A ALL ENCOMPASSING FORCE OF THE UNIVERSES.

the weight of all is lighter than the weight of the universe so what is the  lower weight and it counterpart

what is this relation to having similar weight of data as the weight specific of vechicularity as the types of unrestriced motion in any parameter or any velocity:

the arguments of such processess will define the prescence of force as well as opposing the dark matter formats that are actively using the same types of,1,2,3 stage transferrances of the usage of sequenced stageings.

basically the diemnsionality of the process in 4 vectors

1) weight of all

2)lighter weight than the alternate as either stage 1 + stage 2 or its stage (3)[ this level is retracable from the options on seperation]

3) the weight alterational difference between either level (3)[ this level is also the retrace on reaquired positionls on definite seperations of force from the Milky way],2,1

as such the values of process 4 )as seperated

as the lower weight comparatives of all the vectors used in + vector 1 that is resultance  into  3S process values

or the vector

3 S = to the vectorisations of going through the proceedure into stage repeats of level 3 ( defined as the computations to get through the 3 S process )

where the basis is (3) in stage 3 and (3) in stage 2 are there as indicated

so that the values of level

4)is the trace , the memory, the indication and (category 4 )

are defined as a delay format of the process rerun = universe or that release from the theory that the parenthesis is the galactic force when release is activated on certain basis

as compared to Andromeda galaxy

= level 4 where the data on levels in their computations of  two parenthesis ( as indicated in categroy 4 S)

=values release into levels 5 and 6

as the comparatives with the Milky way

5)

where stages 3 and 3 as additional in the parenthesis of the simulated interactives on basis of similarity, memory trace, and process definition

when run through in level 5 (trace indication is not there )as the force opening into definite Andromeda capture by force of the universe

= stage 6 as the process of seperation and proximal relations to the proces of atraction by seperations from the milky way into attract mode of the Andromeda

the counterpart weight of the process to use the memory in artificial intelligence as a retrace:

3 S to 4 S = 4 R

where level 5 R is currently displaced through or forced through so that a 5 level retrace reversal into

response force 3 ) does not equate to the values of

response action =R 4

or the

action / reaction =in stage 5

but are referenced as displaceing in reverse time as alternations of current aquired force vechicularity in usage to displace vechicularily

from

levels 3  = action &/ or reaction

by reversal or levels 4 by advanced vectorisations into level as boosting and warp drive activations

=5)as all the work done to seperate from the trace of a knetic energy and displacement into force.

Newtonian way into fame

Newton and the way into fame

By Henryk Szubinski

File:NewtonsPrincipia.jpg

as regards the usage of a person during the 15 th century as the type of advances made with the printing press where the moove by a scientist such as Newton was not fully dependant on the amount of research but the process of the scientist having enough money to print his papers into circulation.

This defined the instance process into history where the basics of being a famous astrophysician was not fully dependant on the science .It was the concertion between the ideological states and the scientific influence of taking ones own destiny into ones own makeing which basically defined the difference between ones own motivations.

So that the latin was part of this but only this as aprt of the 2 sides of the conservative denials . This process of fashining ones own future is basic to the ability of the internet to be used with the same types of latin in the presentations of a scientific paper or work in continuation: which by time is said to end with knowledge of its usage.