Day: June 7, 2010
TYPE 1 WEB PHONE new knowledge processess personal reporting
motivating links in the web pages multiples
TYPE 1 WEB PHONE
in THE BROADCAST SECTOR AND SUBSEQUENT ADAPTATIONS
By Henryk Szubinski
first responder vechicle type 1 web phone unit
A certified first responder is a person who has completed a course and received certification in providing pre-hospital care for medical emergencies. They have more skill than someone who is trained in basic first aid but they are not a substitute for advanced medical care rendered by emergency medical technicians, emergency physicians, nurses, or paramedics. The term “certified first responder” is not to be confused with “first responder”, which is a generic term referring to the first medically trained responder to arrive on scene (police, fire, EMS).
Emergency responders are tested during a training exercise.
RUNNING DATA IN NARROWED DOWN DESCRIPTIVES OF A SPECIFIC SENTENCE TO DERIVE THE REAL VALUE CAN BE SUBSEQUENTLY RRELATED TO THE CATGORY HISTORY OF THE SEARCH NARROWING INTO A PROCESS:
the new data will run the descriptive category left side as a video run with the descriptives used on the right side so that the equation
is the right stuff ultra boosted modifications on any knowledge format in the category levels of the right sided page search and located data as the descriptive for the left side data run descriptive.
processing data on 2 run sequenced of data
1) the process to locate a subsect category=
2) the locator sections in process to define the data in its sages of new page data locations as the vector value in which the reverse locator can be used to see the previous data used in the search as the non limited amount of data stored and accessable in repeat:
the problem here is not the data order but the fact that the main category sector is in the process of being STORED in a delay window that waits for the data searched to be input into the store section and then to engage the window in the page presentation as complete.
By running the data on the whole the case subject and the data describing it can be run without resistance prrocessess in a full and new dynamic vector application.
3) this data is then the definitions of the proime category to couple with the main data and the descriptive history BITS used in the descriptive of new data:
THE PRESENTATION IS ON ITS LONG SIDE WITH THE HISTORY GAUGE AS A DIRECT INSTANCE LOCATE TYPE DIAL TO THE LEFT AND RIGHT BY THE USAGE OF A HAND PROCESS OF BY USING THE FINGERS IN A HIGH RATE RESULTANCE .
the usage of a laser will spread the similarity of the moovable gauge wiuth the quantum mechanics of the process locatives of projected data reality by the formats of similar horizontal vectors…in a type spread of the data.
Light Amplification by Stimulated Emission of Radiation (LASER or laser) is a mechanism for emitting electromagnetic radiation, typically lightor visible light, via the process of stimulated emission. The emitted laser light is (usually) a spatially coherent, narrow low-divergence beam, that can be manipulated with lenses. In laser technology, “coherent light” denotes a light source that produces (emits) light of in-step waves of identical frequency, phase,[1] and polarization. The laser’s beam of coherent light differentiates it from light sources that emit incoherent light beams, of randomphase varying with time and position. Laser light is generally a narrow-wavelength electromagnetic spectrum monochromatic light; yet, there are lasers that emit a broad spectrum of light, or emit different wavelengths of light simultaneously.
Same double-slit assembly (0.7mm between slits); in top image, one slit is closed. Note that the single-slit diffraction pattern — the faint spots on either side of the main band — is also seen in the double-slit image, but at twice the intensity and with the addition of many smaller interference fringes.
PROCESS WILL USE THE WINDOW FORMATS OF THE TYPE YOUTUBE AS THE DIRECT VALUE INPUTS OF MULTIPLE VECTORS UPTO THE LEVELS OF A PROBLEM IN THE PROADCASTINGS BY
LIM X = the data on the override of the vector sequence balance level = the override values of the broadcasted process vector fold on the multiples by forwards / reversed ( forwards ) = 4 R as the type resistance extenmsions of the circuitry of a mobile format in which the sattellite uses the values of a Ohm current in the processess of the
forwards Oh,m / reversed Voltage ( forwards Resistance = 4 R extensional resistance of the circuitry.
Community First Responder Schemes
Scottish Ambulance Service “First Responder” vehicle
A Community First Responder Scheme is made up of groups of volunteers who, within the community in which they live or work, have been trained to attend emergency calls received by the NHS (National Health Service) Ambulance Service, providing potentially life-saving treatment and first aid until an emergency ambulance arrives.
The Welsh Ambulance Services NHS Trust, when looking at the locations for Responder Groups, take the following into consideration:
- Towns or villages where it is challenging for an emergency ambulance to arrive at scene within 8 minutes – this is usually in the more rural areas of the county.
- The total number of calls received within these locations must be significant enough for training to take place, ensuring motivation of the group members and that their contribution would have a valued, significant effect on patients.
- Responders are members of the community who are trained to use Automated external defibrillator, Oxygen and other lifesaving equipment to assist ambulance crews, and maintain patient stability whilst professional crews are in attendance. Responders have no special dispensation to break the rules of the road whilst attending calls. Under the Road Traffic Act and various other UK traffic law, correct and permitted use of Blue Lights on a vehicle does not allow the driver to cross solid white lines to overtake, but does allow the driver to treat a red light as a ‘Give Way’ sign. Out of all the Ambulance trusts in the UK, a handful have CFR schemes with dedicated cars, and these are not given blue lights as CFR’s do not undergo blue light training.
gravity is a release force
the gravity release force
By Henryk Szubinski
THEORY OF A ATOMIC MODEL WHERE THE TYPE NEUTRON AND PROTON VALUES CAN BE REGARDED AS ATOMIC BONDS BOUND TO NO SPECIFIC VALUE ATOMIC RELATIONS BUT AS A GRAVITY TYPE ANTI MATTER RELATIONS WITH THE ORBITAL VALUES REPRESENTED NOT AS ORBITALS BUT AS THE DIVISIVE CYLINDERS THAT DEFINE A BOND IN OPEN STATE.
THE GREATER THE AMOUNT OF ELEMTS = THE INCREASED AMOUNT OF BONDS IN A NON LINKED STATE as the potential increase of a anti matter type reference to anti electrons as the type bond value open states in their levels of dynamics where a element would float in a ionic solution.
the amount of electrons = the amount of bonds
so that a amount of 1/2 bond = amount of atoms reduced to a 1/2 value amount by a vector bond icrease + F
where conservations of force are maintained, the value of the amount of electrons is now = 1 + x
so that the extensionality on a Force cylinder vector electron can be located by occilating the value bonds in any decimal value
for example
1/10 bond = 1/10 electron = 1 + x anti electron
Examples of Lewis dot-style chemical bonds betweencarbon C, hydrogen H, and oxygen O. Lewis dot depictures represent an early attempt to describe chemical bonding and are still widely used today.
A chemical bond is an attraction between atoms or molecules and allows the formation of chemical compounds, which contain two or more atoms. A chemical bond is the attraction caused by theelectromagnetic force between opposing charges, either between electrons and nuclei, or as the result of a dipole attraction. The strength of bonds varies considerably; there are “strong bonds” such as covalent or ionic bonds and “weak bonds” such as dipole-dipole interactions, the London dispersion force and hydrogen bonding.
Since opposite charges attract via a simple electromagnetic force, the negatively charged electrons orbiting the nucleus and the positively charged protons in the nucleus attract each other. Also, an electron positioned between two nuclei will be attracted to both of them. Thus, the most stable configuration of nuclei and electrons is one in which the electrons spend more time between nuclei, than anywhere else in space. These electrons cause the nuclei to be attracted to each other, and this attraction results in the bond. However, this assembly cannot collapse to a size dictated by the volumes of these individual particles. Due to the matter wave nature of electrons and their smaller mass, they occupy a very much larger amount of volume compared with the nuclei, and this volume occupied by the electrons keeps the atomic nuclei relatively far apart, as compared with the size of the nuclei themselves.
In general, strong chemical bonding is associated with the sharing or transfer of electrons between the participating atoms. Molecules, crystals, and diatomic gases— indeed most of the physical environment around us— are held together by chemical bonds, which dictate the structure of matter.
If everything was motion opposed youd have a person making a specific moove or think a specific throught that would instantaneously propell the user into outer space:
Fancifull fantasy, well perhaps not. You see , the evidence is there , just look at a galaxy, The andromeda for example is a clear example of what happens in the ealry evolutions of galactic force that is based on spherical stars as well as planets that are basically in a lower value order in relations to the gravity acting outwards passeed theese planets and stars so that the person standing on such a planet could get a instantaneous boost upwards into space.
What makes this a possibility is the slow motion descriptive i will give you and what is happening.
Basically the gravity that expands outwards
g ( S)
which is greater than the planets
is propulsed passed the planet that is at a lower gravity value than the expansive gravity velocity passed the values of its motion outwards
This then is a greater or equal to force that will interact by a drag coefficiency = to the gravity of velocity at a distance outwards defined as
S
This then is the interactive value of the force that compares one person our human, with the gravity in reduction of the planet back to its core value while releasing the human in a gradual decelleration of gravity.
Basically the value of the gravity being accellerated in a super similar force value of multiple vectors displaceing away at similar reductional quant values remaining in one vector out as well as the vectors that are dynamically reduced in the obkjective experiment to eject a human out from the planet core.
Theese value system vector can be seen as 3 levels
1) the expanding glactic core with a increased amount of vector pull outwards, this will be taken as the velocity =1 Vel
2) the planet core and the planet surface are at a specific value of reduction by 1/2 radial opposition meaning the gravity to the core is interrupted at half length and displaces to opposite sides being as such effected by the galactic core velocity outwards. This interrupts the planets gravity compaction at 1/2 S or r
and drags the planet core gravity 1/2 outwards with it so that
1/2 r = F of the galactic expansion Volume + 1
3) Basically the human can now take the ride of his lifetime by forcefully attaching himself or herself to the vector force expansion of the galaxy as a radial value whoose vector
gravity opposition > the gravity release quant remaining from exp ( vol 1 – Catch Vol 2)
this defines the resistance value of the opposed 4 vector force of the
a) galaxy core and
b)the planet core
c) relations to reduced planet core
d) relations of increased gravity core galaxy
a.d /b.c = 4 R
where the opposed usage off the vector override on the process relations with resistance will define the vector directions where they are active in reversals for boost parameters.
the data on the loss of the user and the vectors that define the process on a higher level lift by sustainments of the height alterations of such processess as maintained in a steady occilation of the process described = the usage and applications with flying cars.
On a multi universal scale or level, the process can be used horizontally in any vector direction control.
definitions of specific force intensity of larger universe H2O attractions
WHAT ARE THE BASIC INTERACTIVE VALUES OF A OBJECTIVE TYPE PROPULSION OUTWARDS WITH THE EXPANSIONS OF A GALXY CORE VALUE EXPANSION ON A PLANET THAT IS DOING THE SAME BUT IN A LOWER volume
Vol a than the volume core galaxy expansions Vol b in which the force effect
= volume 1 / volume 2 ( g) S
On Earth, it is found mostly in oceans and other large water bodies, …. to the tendency of water to move up a narrow tube against the force of gravity. … Water has the second highest molar specific heat capacity of any known … Much of the universe’s water may be produced as a byproduct of star formation. …
The universe is a huge reflection of yourself in your own consciousness and … we can createspecific outcomes in our lives and that every act, attitude, … In order to perpetuate a steady stream of positive forces in our life, …
Home of Wiki & Reference Answers, the world’s leading Q&A site · Reference Answers … A short summary or version prepared by cutting down a larger work: abridgment, …. But whereas condensation can be viewed as a sum of intensities relative to … the overallattraction forces between these prevail and bring them …
15 Apr 2010 … Energy is an extremely scarce resource in the universe and no advanced …only enough to counteract the gravitational attraction of the star. …. of low intensity tidalforces at the poles, not of high intensity ones. …. is already be bound in H2O so there is no free oxygen to oxidize anything. …
21 Mar 2010 … Edit: I see from Wikipedia that it is relative to the cosmic background … A gravitational attraction would imply acceleration. … light like any other force, then there should be a large differential in the velocity … For another universe to be exerting an attractive force on all parts of our …
Nor even a specific description of what it is, exactly, that’s being claimed – is … which would imply that the intermolecular forces of attraction between the … to large releases of thermal energy depending on the substance to which the …. A course in thermodynamics, as opposed to a one sentence “definition“, …
The measured heaviness of a specific object: a two-pound weight. … Home of Wiki & Reference Answers, the world’s leading Q&A site · Reference Answers … Gravitational forceof attraction on an object, caused by the presence of a …. In the absence of scales the weights of large animals are often estimated on …
How does the law of attraction, Law of cause and effect and other universal laws work? …According to Wikipedia “the nature of reality at the Planck scale is the … he discovered aspecific geometric array that he found to be fundamental to … you have the definition of consciousness – a conscious energy field …
2- BIO-COM Oxygenated Water have very large negative zata potentials on each …… Silly name, silly claims: “Nectar of the Universe Energized Water is ….. “..operates by passing water over a specific alloy metallic inner core. … “works by unlocking the vast amounts of energy stored in the water molecule H2O. …
20 Oct 2009 … Sorry, Hanford, one doesn’t have to read the specifics to know that … Yet surely as the universe is eternally expanding, ….. Am I right to say the electromotive force is the attraction …. Wikipedia entry for electrostatics: ….. consistent with the one extrapolated from the H2O measurements, …
6 May 2007 … The Law of Attraction cultists are out in force, …… someone who noted that alarge-scale test of the universe manifesting desires took …
the universal spacetime would increase by a volume so that the amount of spacetime in relations to H2O would imply a greater force common value = increased gravity of the water molecular attractions = g
the open bond types of H2O and the values of their plasma states related to increased volume of the universe = Force of the volume pressure relations.
Changes of density
In general, density can be changed by changing either the pressure or the temperature. Increasing the pressure will always increase the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalisation. For example, the density of water increases between its melting point at 0 °C and 4 °C; similar behaviour is observed insilicon at low temperatures.
The effect of pressure and temperature on the densities of liquids and solids is small. The compressibility for a typical liquid or solid is 10−6 bar−1 (1 bar=0.1 MPa) and a typical thermal expansivity is 10−5 K−1.
In contrast, the density of gases is strongly affected by pressure. The density of an ideal gas is
where R is the universal gas constant, P is the pressure, M is the molar mass, and T is the absolute temperature. This means that the density of an ideal gas can be doubled by doubling the pressure, or by halving the absolute temperature.
Osmium is the densest known substance at standard conditions for temperature and pressure.
SCIFIre@lismQuest.com 