qualificative point scores of universal events

 

 

THE QUALIFICATIVE POINT SCORE

of universal events

By Henryk Szubinski

 

 

In a steam enginecutoff is the point in the piston stroke at which the inlet valve is closed. On a steam locomotive, the cutoff is controlled by the reverser.

The point at which the inlet valve closes and stops the entry of steam into the cylinder from the boiler plays a crucial role in the control of a steam engine. Once the valve has closed, steam trapped in the cylinder expands adiabatically. The steam pressure drops as it expands. A late cutoff delivers full steam pressure to move the piston through its entire stroke, for maximum start-up forces. But, since there will still be unexploited pressure in the cylinder at the end of the stroke, this is achieved at the expense of engine efficiency. In this situation the steam will still have considerable pressure remaining when it is exhausted resulting in the characteristic “chuff chuff” sound of a steam engine. An early cutoff has greater thermodynamic efficiency but provides less average force on the piston and is used for running the engine at higher speeds. The steam engine is the only thermodynamic engine design that can provide its maximum torque at zero revolutions.

.

.

.

the types of dimensionalisations of force fields

 

 

THE USAGE OF A FORCE  OFF POINT is defined as on a low or high enterance score for a force field  where the average of 10 % for example is used to define the enterance qualifiers of the force field  by having a range of final scores related to the 50 % FORCE off  point score needed for the FORCE FIELD  GENERATOR qualifications . At a 5 % FORCE off from a exam qualification after the main FORCE point score, the usage of a subsequent qualification of a FORCE  score in the qualifications for the FORCE  point score of a Universal  FORCE  would incoorporate or use the FORCE  score as its degree requirement so that a 50 % would have the same chance as a 55 % score or a 45 %

meaning that the +/- is a type of exam point system ….

basic generations and the force in suage with the types of 1,2,3 H2O force in its basic values of the definitions of the prolocatives and their system indefinite levels of the base prome levels of the generative types of response resillliance of the data on what is the sectional turning moment of the minimal force field values of a +/- F value percentage as the responsives of the resilliance in response to the higher values of their universal specific exterior force fields will include the basics of the higher value = a resistance of the amount boosted and the lower than internal values = a displacement of the basics of values that do not make the FORCE GRADE as the displacement towards such events…

are not always = Tan 45 degrees of a 1/ hypotenuse

but will define the law of the 1/2 Hypotenuse + 10 % boosting of a Tan x angle in which the division of the Tan angle triangle /3 sections as similar triangles:

where the interconnectability of the types of triangles will have 3 basic divisions so that the values of their specific radials in relations to the overstepp lines in relations to the hypotenuse ,the adjacency and the opposite will have basic relations to the common value spread of theese values as a common mean value which will be used in the additions of the 1/2 + range of this common value to define the force field in a Tan angle relation.

.

 

 

File:Powerreverser.JPG

the theory  presented here defines galaxies not as the spiral events that are most commonly visable in the night sky but as the degree arcs of the Tan relations of force field boosting so that the galaxies facing us would greatly tend towards one side of the equation that defines the arcs and their angle of degree forced into the visable fields with the degree Tan angle value as the forcefield that is sustained in relations to the background of the degree values which are basically 3 in number to define the common degree arc..

The most prominent galactic visability would combine theese on a angle to the Cosine

or in the sinus vector values of the force and its degree arc

.

.

THE USAGE OF A CUT OFF POINT is defined as on a low or high enterance score for a exam where the average of 10 % for example is used to define the enterance qualifiers of the exam by having a range of final scores related to the 50 % cut off  point score needed for the exam pass qualifications . At a 5 % cutt off from a exam qulaification after the main exam point score, the usage of a subsequent qualification of a entrance score in the qualifications for the exam point score of a University degree would incoorporate or use the exam score as its degree requirement so that a 50 % would have the same chance as a 55 % score or a 45 %

meaning that the +/- is a type of exam point system ….

a cut above the average

aprooved final cut

cut off point

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s