MARS the 1 reason

MARS SINGULARITY

By Henryk Szubinski

the basis of all life possibilities on Mars would by a general surface survey = the data on the conveyance process to which the basis of the volume of all specimens of a type geological basis would have a problem in edge computations similar to the fractal effect that goes into the linear process : data on the values of the reasons why the basics level of vector data on the positionality as well as pressure that is stationary and non alterant on basis of a atmospherical generation that has similar basis compared to Earth would imply that a parameter on Mars with its direct vector height as influenced only by a non stationary influence such as a lander would imply the change to the same degree as the fractal values of a artificial generation in the alterance of the height value specific to the parameters of the vechicle and not to the stationary force of the vaölues of vector uwards or in the vertical vector on all parameters with their values of expansion outwards. As such the data on the collective point = specific vectorisations of the distance betweeen the poits at the range of the atmospherical influence inside the relations of points seperating into atmo crevices as well as the opening up of the vertex seperations into the same artificial process had the data been as non organic as the values of temperature and humidity to form the pressure ranges that canbe measured in this way.

The processess by which the formats of the general differences between the surface of Mars as the vector values of the open state of vector outlines in the general popography does not need a fractal definition when the direct values of seperated verticies displaced into stationary orbit = the values of the mapping process of a surface area integrity that will define where the inverted processess function by

1)the sperations of vectors outwards

2) the crevices madeby seperation whicle in adhesions process

3) the data on plotting the vector seperations into large space time

Generally the data to on the process by which theese vectors can generate a variance value =

3 cubed

=81 vector definitions for the definitions of the degree of certainty by which a 81 degree spread on the vertical results in

90 degree vertex – 81 degrees of certainty on which the basis =

9 degrees of alterations so that specificially any surface area on Mars can have safety measures on the constraints of motion by the certainty of survival by the data on craters or depressions in the Marsian surface with a incline degree of 9 degrees upwards or downwards. This will define the general locatability of processess that are based on the general loss and reaquirance of the data on why there is a 1 singular minimalised value in response to the process of

4 x = 81

= the 4 quadrance values = 1,2,3,4

as a general quadrance zone value = 9 /4

degrees and the value for displacability based on the redivisives of

9/4 (3) as the way out of and into the processess of 9/4 (1/3)

in which the basis of all relations with the scientific basis of using the programmes of Mars expoloration as based on the certainty that there is a 1 singular value as the sole moitivator for the usage of Mars for the basics of human values = 1 value in all of its divisive problematics as based on external and internal time references as the same value = Force that motivates the relations of associative processess with their designated choice systems and process resultances.

the agreements of the general angles of approach to Mars system 1 as the approach by the angles that define the mapping into longitude and latitude based on the same value relations with the surface angle of speration based on the values of thoose longitudes and latitudes as the process of multiple mapping in the INV TAN SQUARED values for the 1 system in which the exit and enterances can have a common value system

with the values 81 degrees  to its 9 degree subtractives to the 9 .(1/3) as 9 – (1/3) or 9 + ( 1/3)

a) the x value

b) the y value

c) the z value

d) the x,y values

e) the x z values

f) the y z values

g) the x,y,z parameters

motivated sphere arts

living in Earth sphere simulated globes as the applications of the sections into general shaped in a data format of basic geometry to the usage of a geometry of a continent as the solar cell types of implicit interactions by using a 1 value only in its opposed globe habitats with a alternative continent so that the

process of multiple interactions can access the values of force without rotating into the night zone or the day zone as also being in a aquired format by multiple cool side interactions:

the basics on this type of interactions between the formats of triangles

as well as the usage of minimal composite vectors of the multiple states by usage of small global representations in their basic combinance of the desired effects.

as basic motorics of the process to MIMICKING as a developmental type of advanced construct in habitations on Mars for example

Theese will be able to rotate in their similar formats. A basis of Gerard Oneill and Island 1 type values but on the basis of gemetrical complexity to generate natural force and not the sustainements of the process which would lead to depletion.

this type of rsponsive construct can then be inverted into type 1 spheres

as vechicle drive withut fuel formats using the natural spherical force

basics of the larger parameters of such generations that would be able to LINK the day side into the night side

the data on minimal replications of the same process as active in Oxygen molecularity as the same implied function usage as the multi combinance of larger spheres so that a level of extensionality = force of LINK

type 1

on the levels of subsequent generation of force by shorrtening the planarity of a oxygen molecular format as sectioned into force resistance

the way of the force

By Henryk Szubinski

a process given up for the hopelessness of a destiny:

1) beauty is the motivative force of nature

2)destiny is the controll of events in our lives

3) the type 1 relations to the process of a defined limitation in the volumetrics of the process by which the formats for force in boosted vectors of the science of decrepitude are the basics of the force in its formats of similar amount of definitions

definition 1 + definition 2 + definition3 a ( S3) = redefinition 1 + redefinitions 2 + redefinition 3 + redefinition 4 ( 4R)

the basics on the value of force in the universe by the processess of amounting values of similar value processess where the force = a universal 7B value so that

definition 1 + definition 2 + definition 3 + definition 4 + definition 5 + definition 6 + (B7)

= to the value of a F+/- level of : redefinition 1 (m)+ redefinition 2 ( Work)+ redefinition 3 (F.S)  + redefinition 4 + redefinition 5 Gravity force + redefinition electro magnetic Force.

Force, energy, work

Force is a vector with dimensions of mass×length/time² and Newton’s second law is the scalar multiplication

Work is the dot product of force and displacement

process entropy H2O Plank length process of forcing escape velocity univers

process of enthropy  H2O as the value in a Plank length process of forceing escapant universe

H2O as a antropod in early trilobites

the H2O as a shell for a early type protective surface that did not remain in fossil records due to the basic imprint of a trailobite having such evidencial levels of their positionings in what would have amounted to the great blobb of similar protective surfaces as a large volume in which the general tendencie was for protected species to moove through it by a type of motion similar to amobeas but without the need for sustainment for survival, the resultant was that when the life span was expended so too was the shell blobb, though it could moove through the same basis of its protection, the trailoblobbs quickly dehydrated or became absorbed in the bigg blobb of a substance that in larger volumes implied the relation of moovement through smaller types of blobb particles; the collective remains of this type 1 resulted in the type 2 = to the absorbtions of the wastes and the general difference between hydrogen and oxygen leading into type 3 as the combinance of all the H2O that is present in all ocheans everywhere on Earth.

the shells would have had to been oxygen bubbles:

the bubble blobb format would = a gravity implied reference combinance of O2 with the trialobite = gravity where the

g =O2 would be defined on the flatteing process of such values of measurement by smaller O2 formats in the force by which the trialobite O2 stress value of a tensile force which is everywhere the basis of galactic rotation = flattening:

5 Sep 2009 … The process acceptance of the modification, by checking it with the …. where each extra dimension has a size on the order of the Planck length. ….. the force of vectoruniverse delleratated to the value vector 1 …. THE O FORMATS ARE = anti matter , that is why the escapant susy particle …

5 Sep 2009 … Plasma windows have some similarities to force fields, being difficult for matter to pass through ….. where each extra dimension has a size on the order of the Planck length. … D A T A O N U N I V E R S E P R O C E S S E S ….. THE O FORMATS ARE = anti matter , that is why the escapant susy …

6 Sep 2009 … It thus requires more force to accelerate it the same amount than it did at a lower ….. D A T A O N U N I V E R S E P R O C E S S E S …

Indeed, one of the most amazing things about the human thinking process is that every piece of ….. which makes objects move as if they were pulled by a force. …. Estimating theentropy of the universe is a difficult problem, however, ….. This distance is known as thePlanck length, a mere 10-35 metres. …

Hereafter, I will call the inside boundaries the Planck pores. … This process is explored further in the lines below. …. At 10-10sec, force and matter fields differentiated. At 10 -4sec.… distinctive feature that space itself is flowing radially inwards at the Newtonian escape velocity, V = (2 G M / r)1/2. …

From the Planck length to the cosmic horizon is about 60 orders of magnitude. ….. A water molecule is just H2O – two hydrogen atoms and an oxygen atom. … Although entropy is irrelevant with 2 or even 3 balls, with 16 balls entropy is ….. The weak force, which comes into play in many processes in which …

An enrolled Phacopid trilobite Phacops rana crassituberculata.

The total entropy of the observable Universe is correspondingly higher, … budget of ourUniverse is associated with all irreversible process including … ‘calculating the number of relativistic degrees of freedom at the Planck time …. “The wind blew autumn leaves into intercalated lines and arcs of force so …

The time is the Planck length of time taken by light to travel in a vacuum Planck length. …is the exact empirical practice, given the relative low velocity of bodies in the …. is this the end the only force that escapes all the others. … Gravity is the force that governs theUniverse, which gives the form …

3.1 Relating to mass and velocity; 3.2 Relating to force – General equations . ….. gases in the … velocity increased to the point where they can escape from the …. definitions of force processes in H2O universe similar to Chlorine ….. The Planck length is far beyond the reach of any conceivable experiment, … …

The whole universe was that ‘point’; so, the velocity of any object can …. Physics meets philosophy at the Planck scale : contemporary theories in quantum gravity / edited by. …Well, I’m trying to say that this process (in general) might be … Life is just Nature’s Way of maximizing Entropy. …

Can NP-complete problems be solved efficiently in the physical universe? …… the Planck length, or times shorter than the corresponding Planck time ℓP /c ≈ 5.39 × 10−44s. …. the rug via a process called “renormalization. ….. finite upper bound on the entropy of a bounded physical system). …

The secret network of the universe: How quantum geometry might complete … The Planckscale is the smallest possible length scale with units of the order … and create the force of gravity. But since the gravitons also interact ….. The dissolution process does not happen gradually, but rather in discrete steps, …

Kainops invius lateral and ventral view of exoskeleton showing hypostome, anterior & posterior doublure and many apodemes.

a trilobite as the adaptive usage of tools to collect H2O for industrial , technological, medicinal, health, survival means are similar to the types of coiled trailobites in early precambian periods of water environements and their evolutionary mutual cooperations by type 1 H2O involvance.

so what does this have to do with the certainty of humans being able to think or retrace the orignins of the BLOBB fase in evolution as the difference between the states of type 1,2,3

as the difference in size of the H2O molecule to its molecular H and O

Destiny interdisplaced overself  Philosophy

In daily language destiny and fate are synonymous, but with regards to 20th century philosophy the words gained inherently different meanings.

the old age qualifications of a wizard status where the nature of force is known of as the attainements of old age by natural means

Beauty is a characteristic of a person, animal, place, object, or idea that provides a perceptual experience of pleasure, meaning, orsatisfaction.^{[citation needed]} Beauty is studied as part of aesthetics, sociology, social psychology, and culture. An “ideal beauty” is an entity which is admired, or possesses features widely attributed to beauty in a particular culture, for perfection.^{[citation needed]}

The experience of “beauty” often involves the interpretation of some entity as being in balance and harmony with nature, which may lead to feelings of attraction and emotional well-being.^{[citation needed]} Because this is a subjective experience, it is often said that “beauty is in the eye of the beholder.”^[1] In its most profound sense, beauty may engender a salient experience of positive reflection about the meaning of one’s ownexistence.^{[citation needed]} A subject of beauty is anything that resonates with personal meaning.^{[citation needed]}

The classical Greek adjective for “beautiful” was καλλός, kallos. The Koine Greek word for beautiful was ὡραῖος, hōraios,^[2] an adjective etymologically coming from the word ὥρα, hōra, meaning “hour.” In Koine Greek, beauty was thus associated with “being of one’s hour.”^[3]

A ripe fruit (of its time) was considered beautiful, whereas a young woman trying to appear older or an older woman trying to appear younger would not be considered beautiful. In Attic Greek, hōraios had many meanings, including “youthful” and “ripe old age.”^[3]

secret of Beauty

The way of the force

the controll of events in life = the motivative force of nature = beauty

arguments for the avialability of the Hang glider comperable in aquirives only by beauty as the Greecian concept of its value as a difficulty for choice and the denaiability formats:

basically on the multiple universe level , the failure to aquire both = the loss of a parameter known of as height

definitions on vector values as their processess in active vector force as the basis of the multiple resistances of the data on the value reversals of resistance as the

-S = R

where the -S is defined in a volume of force relations

Vol-S

as the basis of the resultance of interactions by Force + R

so that

volume / force = S/R with the special case of the alternator in the S +1 / R-1

in which the data on vectorisations of the Force has similar basis relations with

Vol -1 / force + 1 = S+1 / R-1

as a multiple field common Mean value of all things in the universe as can be extended

Vol-1 / force +1 .( Universe value +1 / bind -1)= S+1 / R-1

where the basics of the universe / bind is the general displacement in which the values of sustainements of a sequence function on very high amounts of inclusions by 1 value reversal on a G value as the amount of mean value measurements -1 /3x

as this basis of referenced reversal into a cubic volume of Force:

By Henryk Szubinski

process of force prevention of H2O as the data acquired at a universe gravity minimal level

The compression ratio of an internal-combustion engine or external combustion engine is a value that represents the ratio of the volume of its combustion chamber; from its largest capacity to its smallest capacity. It is a fundamental specification for many common combustion engines.

In a piston engine it is the ratio between the volume of the cylinder and combustion chamber when the piston is at the bottom of its stroke, and the volume of the combustion chamber when the piston is at the top of its stroke.^[1]

the first flying club that had its beginings very long ago as founded by Leonardo

Davinci: the members of this group were working on formats of human flight.

The completion of the search for human flight in controllable situations lead to

the invention of the hang glider, which became a secret hobby at that time for

the special group as adventurers of a very little known activity.The concept and the

philosophy was to keep the sectert of flight in the activity itself as part of a inseperable

relation with the activity of flying at higher diemsnions than the ground level, so that

a type of Socrateesian World of Ideas about the emotions and knowledge gained by flying

was maintained in the activity high up in the sky. Basically the triangulations of the type

isoceelees triangulations = 60 degrees x 3

As such the basis of the secret that you can do it yourself.Basically the measure of time in its multiple

and unknown vector directions:the hang glider AND WHAT PHILOSOPHY CALL  THE  overself

BASIC TYPE 1 : sustainements of H2O balance in ecology by the insight into gravity in its minimal values as well as prevention in relations to high levels of gravity taking over where water used to be but with a level of gravity that is no longer active:

process of force  prevention of H2O as the data aquired at a universe  gravity minimal level:

“The original S-S universe and its more recent successors all posit a universe that is …… Is there some concrete scientific data? Or it is a hypothesis? ….. Can you use the local sealevel?–Commander Keane 20:38, 7 November 2005 (UTC) …. Obviously, the force pulling that person down, the force of gravity, …

herefore, our understanding of the fundamental forces of the universe is incomplete ….. Hi Science Wizards; My question is ,does Gravity have any measurable effects on …… hold on, while I’m here does anyone know the chemical formula of H2O? …. there’s also the question of security and vandalism prevention. …

4 Apr 2004 … Everything that occurs in the universe revolves around energy. …. Eating or burning the carbohydrates form CO2 and H2O while releasing energy in the process.5 … In the polar region solar radiation is minimal and we see a net loss of heat. ….. Force = mass xgravity. Work = Force x displacement …

SIMILAR 3 S ZONEING AS THE 3 Y = SUSTAINEMENTS OF WORKL LIFT BY THE PROCESS DISPLACEMENT OF THE GENERAL REASONS FOR THE ALTERNATIVE LIFT INDICATORS:

Szubinski developement theory of the universal FORCE WING:

data on the minimal value in which all data on the cubics of Work equations as the relations of 1/3 x = 3 y

Exhibit 2: The Universe of Data Sources for the CCL 3 Process Name of Data …… The Open Practical Knowledge Acquisition Toolkit (TOPKAT) The Prokaryotes: A …… It meets considerations because it meets all NDWAC minimum data requirements. …… Maximum Contaminant Levels are the maximum permissible level of a …

This data acquisition and analysis method would be implemented as an on-line process …..processes, including regional and global mean sea level change. …

http://shareflare.net/download/9869.983bf309883f560ee18a311e4e/H2O.rar.html ……superpower, supervisory control and data acquisition, supplement program …

… had attained a critical level, such that competition for necessities was … Fuller also claimed that the natural analytic geometry of the universe … I seem to be a verb, an evolutionary process – an integral function of the universe.” … This was designed to show Earth’s continents with minimum distortion …

These data have been assembled into The Clean Fuels Report comparison of fuel … The bagasse generated by the process is not wasted, but is used in power plants as a …. to mandate that minimum proportions of oxygenates be added to automotive … to reduce air pollution, in particular ground-level ozone and smog. …

or minimal anti gravity value (l.a.v) … -From Wikipedia (see Web Links to …. as a human function of theprocess in value resultance of the equation = y … ….. data force vector strings action reaction universe sustainment force fields … … process stage H2O reach removal of the Universe process ….. Wikipedia …

4 Feb 2010 … as a basic continuiim for the basis of 1 collective gravity core … as a 4 level universe. the angular diameter can be calculated using the … data is minimal on what can cause the H2O similarity of a audial wave format … the spacial parameters of the connective definition = collective force; …

basically the values of a fprce in process where the data on vector displacements is reduced into the levels of H2O as their value immersions into the basics of a alteration of the wobble in the data on its reasons for maintained speccific levels of the continuiim that is non limited to the increase of a force field by the increments where the resultance of a full value =

the basis of activations and /or deactivations by 3/4 = F

Formula

The ratio is calculated by the following formula:

, where

= cylinder bore (diameter)

= piston stroke length

= clearance volume. It is the volume of the combustion chamber (including head gasket). This is the minimum volume of the space at the end of the compression stroke, i.e. when the piston reaches top dead center (TDC). Because of the complex shape of this space, it is usually measured directly rather than calculated.

Fault finding and diagnosis

Measuring the compression pressure of an engine, with a pressure gauge connected to the spark plug opening, gives an indication of the engine’s state and quality. There is, however, no formula to calculate compression ratio based on cylinder pressure.

If the nominal compression ratio of an engine is given, the pre-ignition cylinder pressure can be estimated using the following relationship:

where  is the cylinder pressure at bottom dead center (BDC) which is usually at 1 atm,  is the compression ratio, and  is the specific heat ratio for the working fluid, which is about 1.4 for air, and 1.3 for methane-air mixture.

For example, if an engine running on gasoline has a compression ratio is 10:1, the cylinder pressure at top dead center (TDC) is

This figure, however, will also depend on cam (i.e. valve) timing. Generally, cylinder pressure for common automotive designs should at least equal 10 bar, or, roughly estimated in pounds per square inch (psi) as between 15 and 20 times the compression ratio, or in this case between 150 psi and 200 psi, depending on cam timing. Purpose-built racing engines, stationary engines etc. will return figures outside this range.

Factors including late intake valve closure (relatively speaking for camshaft profiles outside of typical production car range, but not necessarily into the realm of competition engines) can produce a misleadingly low figure from this test. Excessive connecting rod clearance, combined with extremely high oil pump output (rare but not impossible) can sling enough oil to coat the cylinder walls with enough oil to facilitate reasonable piston ring seal artificially give a misleadingly high figure, on engines with compromised ring seal.

This can actually be used to some slight advantage. If a compression test does give a low figure, and it has been determined it is not due to intake valve closure/camshaft characteristics, then one can differentiate between the cause being valve/seat seal issues and ring seal by squirting engine oil into the spark plug orifice, in a quantity sufficient to disperse across the piston crown and the circumference of the top ring land, and thereby effect the mentioned seal. If a second compression test is performed shortly thereafter, and the new reading is much higher, it would be the ring seal that is problematic, whereas if the compression test pressure observed remains low, it is a valve sealing (or more rarely head gasket, or breakthrough piston or rarer still cylinder wall damage) issue.

If there is a significant (> 10%) difference between cylinders, that may be an indication that valves or cylinder head gaskets are leaking, piston rings are worn or that the block is cracked.

If a problem is suspected then a more comprehensive test using a leak-down tester can locate the leak.

Basic properties

The following section uses the Cartesian coordinate system with basis vectors

and assume that all vectors have the origin as a common base point. A vector a will be written as

[edit]Equality

Two vectors are said to be equal if they have the same magnitude and direction. Equivalently they will be equal if their coordinates are equal. So two vectors

and

are equal if

[edit]Addition and subtraction

Assume now that a and b are not necessarily equal vectors, but that they may have different magnitudes and directions. The sum of a and b is

The addition may be represented graphically by placing the start of the arrow b at the tip of the arrow a, and then drawing an arrow from the start of a to the tip of b. The new arrow drawn represents the vector a + b, as illustrated below:

This addition method is sometimes called the parallelogram rule because a and b form the sides of a parallelogram and a + b is one of the diagonals. If a and b are bound vectors that have the same base point, it will also be the base point of a + b. One can check geometrically that a + b = b + a and (a + b) + c = a + (b + c).

The difference of a and b is

Subtraction of two vectors can be geometrically defined as follows: to subtract b from a, place the end points of a and b at the same point, and then draw an arrow from the tip of b to the tip of a. That arrow represents the vector a − b, as illustrated below:

[edit]Scalar multiplication

A vector may also be multiplied, or re-scaled, by a real number r. In the context of conventional vector algebra, these real numbers are often calledscalars (from scale) to distinguish them from vectors. The operation of multiplying a vector by a scalar is called scalar multiplication. The resulting vector is

Intuitively, multiplying by a scalar r stretches a vector out by a factor of r. Geometrically, this can be visualized (at least in the case when r is an integer) as placing r copies of the vector in a line where the endpoint of one vector is the initial point of the next vector.

If r is negative, then the vector changes direction: it flips around by an angle of 180°. Two examples (r = −1 and r = 2) are given below:

Scalar multiplication is distributive over vector addition in the following sense: r(a + b) = ra + rb for all vectors a and b and all scalars r. One can also show that a − b = a + (−1)b.

[edit]Length

The length or magnitude or norm of the vector a is denoted by ||a|| or, less commonly, |a|, which is not to be confused with the absolute value (a scalar “norm”).

The length of the vector a can be computed with the Euclidean norm

which is a consequence of the Pythagorean theorem since the basis vectors e₁, e₂, e₃ are orthogonal unit vectors.

This happens to be equal to the square root of the dot product of the vector with itself:

We will discuss this issue in Mass and Gravity chapter. … At particle level electrons are the same and we cannot differentiate them from one another. …. the universe acquired an enormous cosmological constant, which faded to zero as … the time of The Big Bang when structure in the early universe was minimal, …